{"product_id":"bonehead-rc-baja-hd-wheelie-bar-kit","title":"BoneHead RC Baja HD Wheelie Bar Kit","description":"\u003cp\u003eMore than a wheelie bar it’s an HD bashers bar, the BoneHead RC V2 isn’t designed simply to stop your Baja tipping onto its back. It’s a Heavy Duty wheelie bar built for extreme bashing. If your Baja is being driven hard, launched, landed heavily and subjected to the kind of abuse that a serious basher puts a car through, you want a wheelie bar that can take it. That’s exactly why the V2 was redesigned.\u003c\/p\u003e\n\u003cp\u003eThe original BoneHead RC wheelie bar has been around for years and has done its job well, but the design deliberately allowed some flex and movement through the system. The new HD version takes a completely different approach.\u003c\/p\u003e\n\u003cp\u003eAt 20 kg load:\u003c\/p\u003e\n\u003cp\u003eV1 deflects 12 mm\u003cbr\u003eV2 HD deflects only 4 mm\u003cbr\u003e\u003cstrong\u003e3× the stiffness, with 66.7% less deflection\u003c\/strong\u003e\u003cbr\u003eThe whole assembly has been redesigned as one rigid structure, with stronger brackets, substantially more rigid side bars and additional bracing tying both sides together.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat Has Changed\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eCompletely redesigned heavy-duty 4mm mounting brackets 137% stonger, with smooth transitions around the formed bends to remove sharp corners and reduce potential stress points\u003c\/li\u003e\n\u003cli\u003eChanged material and redesigned for a more rigid side bars\u003c\/li\u003e\n\u003cli\u003e13mm diameter support bar tying both sides together and resisting twist\u003c\/li\u003e\n\u003cli\u003eReinforced upper structure linking the brackets together\u003c\/li\u003e\n\u003cli\u003eBlack hardware throughout\u003c\/li\u003e\n\u003cli\u003eEtched BoneHead RC brackets\u003c\/li\u003e\n\u003cli\u003eEngraved BoneHead RC bars\u003c\/li\u003e\n\u003cli\u003eThis is not simply the old wheelie bar with thicker brackets fitted. The complete system has been engineered so the brackets, side bars and supports work together as one rigid structure.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eWhy The HD Design Is Stronger\u003c\/strong\u003e - A wheelie bar is only as strong as the complete structure. Strengthening one part while leaving movement elsewhere simply transfers the load to the next weak point. The HD design ties both sides of the assembly together to reduce independent movement and twisting under hard acceleration and impact. The result is a much more rigid and controlled setup.\u003c\/p\u003e\n\u003cp\u003eProven Bar Material - The material used for the side bars has been proven on BoneHead RC test rigs back in 2019. It was originally too rigid for the earlier bracket design, so a more flexible material was used instead. The new HD structure now allows us to use this much more rigid material as part of the complete system. After years of hard use, it has proven resistant to warping and permanent bending, which is exactly why it was chosen for the new HD design.\u003c\/p\u003e\n\u003cp\u003eAdjustable To How You Run - The wheelie angle can be adjusted to suit the setup you want, from keeping the front end down to allowing a much higher wheelie angle.\u003c\/p\u003e\n\u003cp\u003eYou can install the optional twin wheel for a wider contact point for more stability. you can view the optional twin wheel kit \u003ca href=\"https:\/\/taylorrc.co.uk\/products\/bonehead-rc-twin-wheel-conversion-kit-for-bonehead-adjustable-wheelie-bars\" target=\"_blank\" title=\"Bonehead RC dual wheel conversion kit\" rel=\"noopener\"\u003e\u003cstrong\u003eHERE\u003c\/strong\u003e\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eInstructional video for installation can be viewed \u003ca href=\"https:\/\/www.youtube.com\/watch?v=LjyXohyxO-8\" title=\"BoneHead RC installation instructions for wheelie bars\" rel=\"noopener\" target=\"_blank\"\u003e\u003cstrong\u003eHERE\u003c\/strong\u003e\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eBoneHead RC HD- A complete redesign of the original bar, built around rigidity, strength and control. No cosmetic update dressed up as a new product. Just a properly engineered heavy-duty wheelie bar.\u003c\/p\u003e\n\u003cp\u003eNOTE: Tools Needed\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eTorx T40\u003c\/li\u003e\n\u003cli\u003eTorx T25\u003c\/li\u003e\n\u003cli\u003e13mm spanner\u003c\/li\u003e\n\u003cli\u003e10mm spanner\u003c\/li\u003e\n\u003cli\u003e8mm spanner\u003c\/li\u003e\n\u003cli\u003e7mm spanner\u003c\/li\u003e\n\u003cli\u003e4mm Allen key\u003c\/li\u003e\n\u003cli\u003e2.5mm Allen key\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Bonehead RC","offers":[{"title":"Default Title","offer_id":62429378511235,"sku":"BHR3023","price":119.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0677\/0550\/3978\/files\/bonehead-rc-updated-v2-hd-wheelie-bar-baja-5b-installed.png?v=1787259829","url":"https:\/\/taylorrc.co.uk\/products\/bonehead-rc-baja-hd-wheelie-bar-kit","provider":"Taylor RC","version":"1.0","type":"link"}